What glue do you recommend for fixing G1 parts?

[FreakNasty]

I'm fixing Hardhead's chest plate thing as it broke off the plastic hinge.

Any suggestions?

[JonoPrime]

Ive used Gorilla Glue in the past and never had any problems.

Give the area a light sanding prior, to help with adhering the parts together.

Crazy glue Id avoid, as it tends to not stick that well.

[imfallenangel]

Depends on the type of break, plastic, etc.

I've used everything from super glue (and the 10,00 brands of Cyanoacrylates glues, both liquid or gel) to various epoxies.

I've had some that were nasty and didn't bond well, damaged the plastic, melted it, etc.

And I've had some that 30 years later, it's still solid.

If you can clamp it gently and let it dry/bond for 24 hours, regardless of glue, it gives you the best chance of a permanent bond. It it pops apart, then, you move to the next type of glue and hope that you don't end up with damage to the parts.

There is a "plastic" one that I've tried with mixed results but it wasn't bad, again, it depended on the type of plastic.

http://www.lepage.ca/en/lepage-products/super-glue/liquid-super-glue/super-glue-for-plastic.html

Canadian Tire has this I believe... no sure if Walmart does.

[Buvshaia]

Ugh, very informative ;)

[justprime]

LePage or permatex make a 2 part primer /glue that works on TF plastics ...wurth makes one as well, industrial strenght lastly go to an auto motive supplier napa or such the car industry makes all kinds of products to repair /weld,,bond plastics ,talk to them on the type of plastic you need to bond repair they can help