Quote:
Originally Posted by ngnaw
I have the tail problem!!!! I did the hip fixes with the hour of compressing the springs, that worked.
I have Bondic for the tail fix but would epoxy be better? or Bondic? I'm just concerned that it's a ratchet and never used Bondic on a ratchet joint.
|
You're really not using it on the joint itself, but on non-moving part that forms part of the joint.
Bondic requires quite a bit of prep to use properly (e.g. sloping and roughening surface) and ultimately failed for me after some play as a lot of shear force is applied to the weld surface.
I'd give epoxy a go, but it's gotta be the right type for the plastic.
