Cybertron.CA - Canadian Transformers News and Discussion
Go Back   Cybertron.CA - Canadian Transformers News and Discussion > Transformers Discussion > Transformers Customs and Artwork

Reply
 
Thread Tools
Old 08-05-2013, 08:56 PM   #1
chroma23
douchebag
chroma23's Avatar
Join Date: May 2009
Location: GTA
Posts: 1,141
Talking shapeways - G1 Predaking Crazy Devy Augmentation Kit



this is actually funny because i was designing these parts at the same time as echotransformer did lol, but we have slightly different approaches....

anyways here it is, a kit of parts which addresses some issues to your crazy-devy-enhanced G1 predaking:

01 ratchet notch pieces for CDMW-36 hip parts
02 leg stopper for CDMW-15 leg parts
03 neck piece for CDMW-10 head part


IF YOU DO NOT HAVE ANY OF THE ABOVE CDMW PARTS, THIS KIT IS NOT FOR YOU


you can order from shapeways here:
https://www.shapeways.com/model/1234...ation-kit.html

tested and recommended material is WSF polished, but you are welcome to try out in BSF if you dont feel like painting the parts in black

WISHLIST
sorry, no wishlists or requests for G1 predaking at the moment, as i will like to concentrate my efforts on my xovergen powermaster prime parts for now

but do let me know if any of my parts are not working etc

01 ratchet notch pieces for CDMW-36 hip parts

- fixes fatal problem where the new hip joints will not support itself due to predaking's torso and arms weight, thus the entire figure tipping over and falling apart
- dis-assembly and re-assembly required on the crotch piece. just remove the screws and insert the notch parts as shown in this photo:

- then put in the legs and re-assemble again, taking note that the hole or "belly button" above the crotch faces forward so that you can insert the crotch plate later on. please note that some force is necessary when re-screwing the crotch piece. this will ensure that the ratchets stay locked; better safe than sorry and do not worry as it will not damage any parts in any way. the notches will be slightly bent inside, but it will not break and will withstand the weight of predaking's body
- my predaking has been standing strong for weeks, and yes it makes clicking ratchet sounds when rotating the legs
- no grease required on the ratchet joints


02 leg stopper for CDMW-15 leg parts


- prevents tantrum from sliding down (and the whole figure falling apart) due to the body's weight when using the extended foot parts
- just insert from the back as shown

03 neck piece for CDMW-10 head part



- purely aesthetic piece, gives predaking a neck so his head will not sink into the body as of he has no neck, especially with the lion mane inserts

its not much but thats pretty much it for this simple kit of parts, but a must-have if you want your crazy-devy-enhanced predaking to stand and not tip over. questions and comments are welcome
__________________
My Shapeways Store - CHROMA HANDS: shapeways.com/shops/chromahands
Follow on Facebook: http://www.facebook.com/chromahands

BST on cybertron.ca: http://www.cybertron.ca/boards/showthread.php?t=47234
FEEDBACK on cybertron.ca: http://www.cybertron.ca/boards/showthread.php?t=16129

Last edited by chroma23; 08-08-2013 at 04:55 PM.
chroma23 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Transformers Shopping







Donate to Cybertron.ca
Donations keep this site running, thanks for your support. More details here.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 11:03 AM.



Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.