Cybertron.CA - Canadian Transformers News and Discussion
Go Back   Cybertron.CA - Canadian Transformers News and Discussion > Transformers Discussion > Transformers General Discussion

Reply
 
Thread Tools
Old 03-30-2018, 02:23 PM   #1
FreakNasty
Generation 2
Join Date: May 2007
Location: Newfoundland
Posts: 173
Help with CW Computron!

#1 I find Brawls leg mode splits at the bottom easily

#2 When moving his arms around, his chest plate splits apart easily and I have to put his inner workings tight together again. (It seems only the chest plate is holding everything together)
FreakNasty is offline   Reply With Quote
Old 03-30-2018, 02:38 PM   #2
WereDragon EX
Robot Master
Join Date: Jun 2014
Location: Vancouver
Posts: 767
Re: Help with CW Computron!

#1 Try coating the tabs that hold the leg mode together with Future floor polish and then press the tabs into their ports and leave the polish to dry for a day or so. It thickens the tabs and might allow them to "grip" in the ports better and prevent the leg mode from splitting apart.

#2 The chest plate is holding everything together. Try doing the same fix with it as suggested in #1.

Last edited by WereDragon EX; 03-30-2018 at 02:49 PM.
WereDragon EX is offline   Reply With Quote
Old 03-30-2018, 03:35 PM   #3
FreakNasty
Generation 2
Join Date: May 2007
Location: Newfoundland
Posts: 173
Re: Help with CW Computron!

Quote:
Originally Posted by WereDragon EX View Post
#1 Try coating the tabs that hold the leg mode together with Future floor polish and then press the tabs into their ports and leave the polish to dry for a day or so. It thickens the tabs and might allow them to "grip" in the ports better and prevent the leg mode from splitting apart.

#2 The chest plate is holding everything together. Try doing the same fix with it as suggested in #1.
Thank you, I'll give that a try!
FreakNasty is offline   Reply With Quote
Old 03-30-2018, 03:57 PM   #4
WereDragon EX
Robot Master
Join Date: Jun 2014
Location: Vancouver
Posts: 767
Re: Help with CW Computron!

Quote:
Originally Posted by FreakNasty View Post
Thank you, I'll give that a try!
No problem, hope it helps.
WereDragon EX is offline   Reply With Quote
Old 03-30-2018, 04:03 PM   #5
GotBot
Nexus Maximus
Join Date: Feb 2016
Location: Newfoundland and Labrador
Posts: 2,533
Re: Help with CW Computron!

The chest is what it is and the polish might work. For the legs, I actually took the feet apart and sanded the ratchets. They still ratchet, just softly, and I can pivot the ankles and both legs stay together.
GotBot is offline   Reply With Quote
Old 03-30-2018, 07:02 PM   #6
Zenith27
Woodward's G1 lurker
Zenith27's Avatar
Join Date: Jan 2016
Location: Surrey
Posts: 384
Re: Help with CW Computron!

Quote:
Originally Posted by WereDragon EX View Post
#1 Try coating the tabs that hold the leg mode together with Future floor polish and then press the tabs into their ports and leave the polish to dry for a day or so. It thickens the tabs and might allow them to "grip" in the ports better and prevent the leg mode from splitting apart.

#2 The chest plate is holding everything together. Try doing the same fix with it as suggested in #1.
Finger nail top coat works as well. Found on the rack with all the nail polish. Comes with a little brush too!
__________________
That's not a joke, that's a severe behavioral disorder!
Zenith27 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Transformers Shopping







Donate to Cybertron.ca
Donations keep this site running, thanks for your support. More details here.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 03:42 PM.



Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.