Hey everyone,
I believe this is my first actual posting of a custom. I rarely do them so please bare with me if i miss any details.
So i was able to customize his rear wheel joints and those rear red tab joints to be able to remove (for sexier robot mode) and connect to still transform to sexy truck.
And here's how i did it.
Remove all 4 screws in this area here (2 on each side)
Carefully untab and remove the entire lower section. and i mean be careful because there are 2 small tabs inside the mold that can break off. One of mine did
*if you know a better way please do so*
This will help you slide off the red tab joints.
With an xacto knife, Shave off 3 quarters of the circle joint. It's important to leave 1 quarter untouched. This corner will help reconnect the joint back in.
A good way to do it is to keep shaving and testing the joint once you've made a comfortable fit.
Now the wheels!
Use a pin puncher and mallet to remove the pins. Remove the pins from the joint and place just the pins back as they were on Prime. *sorry i didn't take pics for that*
Again with an xacto knife cut off the top part of the joint as in the pic. Make sure not to cut too much or else the joint won't hold. If done proper you should be able to just snap the joint back into place.
And voila!! You now have removable kibble for his face killer mode but still usable for truck mode.
LMK wat you guys think?
(FYI, yes that is Buster Prime)