|
|
06-18-2015, 01:09 AM
|
#1
|
|
CW Motormaster shoulder issue
Hi
I finally completed my CW Menasor and I've noticed wht i think is a flaw in the design of Motormaster's torso mode shoulders. They depend on a tiny piece of plastic on each shoulder pegging into small holes on what becomes Menasor's back. Problem is that the shoulder pegs pop out any time you rotate Menasor's ratcheting shoulder joint.
Does CW Optimus have this issue? (Let me know if pics will help clarify what I mean)
Anyone know of a fix (that doesn't involve drilling holes through the windvanes)?
The stunticons are all great separately, just not so hot when they are combined. Menasor is all wibbly, wobbly, difficult to stand, while Superion is altogether quite solid.
|
|
|
06-18-2015, 10:21 AM
|
#2
|
Location: calgary alberta
|
Re: CW Motormaster shoulder issue
I had the same problem.
on optimus,the problem doesn't exist.i think it's because of mold degradation already,coupled with cheap plastic.
it seems/feels like motormaster has cheaper plastic than prime does if that's even possible.(it really does feel cheaper than prime plastic lolz)
to fix my motormasters shoulders,i simply coated those two shoulder tabs in question with a thin coat of clear nail polish.
just make sure even though most clear nail polishes say "quick dry", let it dry completely for almost a day to fully harden and you should have no problem.
just don't "gob" it onto those tabs.
__________________
now open for commissions...big and small...minor and heavy,you dream it,i make it.
|
|
|
06-18-2015, 01:45 PM
|
#3
|
|
Re: CW Motormaster shoulder issue
I've had this problem too. It was really annoying just trying to pose that shoulder.
I'm going to try that fix, thanks chans.
|
|
|
06-18-2015, 04:22 PM
|
#4
|
|
Re: CW Motormaster shoulder issue
Yes, I give it a shot too. Thanks!
|
|
|
07-03-2015, 12:21 PM
|
#5
|
|
Re: CW Motormaster shoulder issue
Nail polish idea worked somewhat the first time, but no longer.
|
|
|
07-03-2015, 02:16 PM
|
#6
|
|
Re: CW Motormaster shoulder issue
Quote:
Originally Posted by chans formers
I had the same problem.
on optimus,the problem doesn't exist.i think it's because of mold degradation already,coupled with cheap plastic.
it seems/feels like motormaster has cheaper plastic than prime does if that's even possible.(it really does feel cheaper than prime plastic lolz)
|
I'm seeing the same thing between my Optimus and MM. MM seems to use a much softer plastic than Optimus, who is rock-solid in all modes. My MM seems to require quite a bit of "massaging" to get into truck-mode properly.
While the tabbing of the forearm for MM to Menasor mode is not loose by any means on mine, it's definitely a weaker join than on Optimus. With Optimus, I can take the combiner arm and spin it without worrying that Prime's forearm will pop out. With Menasor, it's about a 50/50 chance that it'll come loose. I've heard of others' MM's barely holding there in standard museum poses...
|
|
|
07-03-2015, 10:04 PM
|
#7
|
Location: Autobot VanCoolVerCity
|
Re: CW Motormaster shoulder issue
|
|
|
04-11-2016, 10:09 PM
|
#8
|
|
Re: CW Motormaster shoulder issue
Quote:
Originally Posted by Gordicon14
Hi
...I've noticed wht i think is a flaw in the design of Motormaster's torso mode shoulders...Problem is that the shoulder pegs pop out any time you rotate Menasor's ratcheting shoulder joint.
Anyone know of a fix (that doesn't involve drilling holes through the windvanes)?
|
As an alternative to drilling holes - you can purchase these items from shapeways
https://www.shapeways.com/product/5R...-brace-cannons
The fit onto Menasor and help lock the shoulders in place.
They can be ordered in a variety of colors, and also mount on vehicle mode.
They can also be combined into a single weapon, or mounted on a sort of shoulder mounted 'backpack' for Dragstrip by using the hand/foot accessory.
|
|
|
04-23-2016, 02:33 PM
|
#9
|
|
Re: CW Motormaster shoulder issue
Quote:
Originally Posted by Midrealm
As an alternative to drilling holes - you can purchase these items from shapeways
https://www.shapeways.com/product/5R...-brace-cannons
The fit onto Menasor and help lock the shoulders in place.
They can be ordered in a variety of colors, and also mount on vehicle mode.
They can also be combined into a single weapon, or mounted on a sort of shoulder mounted 'backpack' for Dragstrip by using the hand/foot accessory.
|
Do they really look that pink under a flash? It seems like you have one shot there without a flash and it looks purple as intended.
|
|
|
04-23-2016, 03:07 PM
|
#10
|
|
Re: CW Motormaster shoulder issue
Does UW Menasor have the same problem?
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Donate to Cybertron.ca |
Donations keep this site running, thanks for your support. More details here.
|
|
All times are GMT -4. The time now is 12:12 AM.