|
|
01-11-2012, 03:23 PM
|
#31
|
|
Re: 2012 TFCon Charity Project
:O That actually works really well! It really does share a lot of similarities with the original toy. That blows my idea of the movie Lockdown mold (based on Nemy Pred's awesome Animated Dinobot custom) outta the water!
The Hoist head is also a great idea and would top it off perfectly, but don't forget that there was that Universe 2.0 Dinobot, too. But a Hoist head may be cheaper and easier to come by.
__________________
Wanna stalk me on the twitter? Just follow Medikor83.
Looking for: - Energon Snow Cat's mini-con connecter piece.
- Hasbro MP Rodimus prime junker (need left shoulder/arm).
|
|
|
01-11-2012, 03:26 PM
|
#32
|
|
Re: 2012 TFCon Charity Project
OOOH, good call, i'll have to dig up my uni dinobot and check
__________________
|
|
|
01-11-2012, 03:27 PM
|
#33
|
|
Re: 2012 TFCon Charity Project
Quote:
Originally Posted by purple-bot
I was gonna do dinobot out of drift, mainly because of his swords.
|
I love the idea of a dinobot made out of a drift. what with dinobots samurai style honour code. (oooo TM2 dinobot drift, i wonder if i could get the crimson paint off the united version?) you could easily mold/remold his segmented rotating sword and put it where the long sword is on his back. It also ties in to the fact that he chose a fast alt mode (velociraptor).
mabey I'm over thinking it again but i am putting that TM2 DinoDrift in my to do pile.
__________________
Looking for: (loose is fine)
-POWERMASTER PRIME- box only (original US release)
-legends wheelie.
-IGear Weapons specialist.
|
|
|
01-11-2012, 03:38 PM
|
#35
|
|
Re: 2012 TFCon Charity Project
I was gonna use Drift for Cheetor.
Animated Cheetor uses Animated Blurrs mold, Classic Blurr and Drift use the same mold. Figured it would work.
__________________
"Actual change time may vary."
|
|
|
01-11-2012, 03:43 PM
|
#36
|
|
Re: 2012 TFCon Charity Project
Quote:
Originally Posted by Mumps
*snip*
|
Quote:
Originally Posted by obakemono
*snip*
|
While I agree with Mumps that I don't quite see Wreck-Gar as Tarantulas - I am never never never going to tell someone donating tehir time and enrgy and figures to the project to not do something. Besides, there's always a good chance I could be quite surprised -
for example....
Quote:
Originally Posted by purple-bot
I was gonna do dinobot out of drift, mainly because of his swords. but then some friends mentioned i should use kup, so i made this digibash, should i use cup? I also plan on using armada hoist's head. unless you think thats a rip off of the cybertron botcon version.
|
(see that segue ) I would never have thought Kup looked good as Dinobot and yet this looks awesome!!
If you have an idea you like, run with it. If you want to run ideas past people here then that's always welcome. If you would like a digibash done then feel free to ask and hopefully someone can do a rough one of some sort for you.
__________________
Light Our Darkest Hour [{o}] Till All Are One
If you are reading this then you must be bored...
|
|
|
01-11-2012, 04:50 PM
|
#37
|
|
Re: 2012 TFCon Charity Project
Quote:
Originally Posted by CyberMnky
While I agree with Mumps that I don't quite see Wreck-Gar as Tarantulas - I am never never never going to tell someone donating tehir time and enrgy and figures to the project to not do something. Besides, there's always a good chance I could be quite surprised -
If you have an idea you like, run with it. If you want to run ideas past people here then that's always welcome. If you would like a digibash done then feel free to ask and hopefully someone can do a rough one of some sort for you.
|
That's why I wanted to ask about it. I am having a hard time picturing it, but at the same time had you told me Kup as Dinobot before that photo I would have called you insane! That's what Customs are all about though, surprises. Some of the best customs have been the ones people thought would never work. I mainly wanted to ask so I could see your inspiration for using the mould.
Whether you switch to a new bot, and do WG as a personal project, or if you keep it on board for this project, I really want to see how it works.
Really though, I am excited for all of these bots from this project, I love the theme!
Also, even though I hadn't seen Purple-Bot's digi-bash, my Waspinator will be using the Tomahawk mould. I have a few surprises up my sleeve that I can hopefully pull off though. This will be my first custom with major mould changes.
(My Junkion Zombie Bob doesn't count, cause the mould changes were basically just me beating the everloving shit out of a Wreck-Gar >.>)
|
|
|
01-11-2012, 08:09 PM
|
#38
|
|
Re: 2012 TFCon Charity Project
Quote:
Originally Posted by racerguy76
I was gonna use Drift for Cheetor.
Animated Cheetor uses Animated Blurrs mold, Classic Blurr and Drift use the same mold. Figured it would work.
|
If you would like to use the Blurr doors/guns for cheetor I believe I have a couple I can mail you. Just lemme know.
__________________
Light Our Darkest Hour [{o}] Till All Are One
If you are reading this then you must be bored...
|
|
|
01-11-2012, 09:49 PM
|
#39
|
Location: Keswick, Ontario
|
Re: 2012 TFCon Charity Project
Quote:
Originally Posted by Mumps
That's why I wanted to ask about it. I am having a hard time picturing it, but at the same time had you told me Kup as Dinobot before that photo I would have called you insane! That's what Customs are all about though, surprises. Some of the best customs have been the ones people thought would never work. I mainly wanted to ask so I could see your inspiration for using the mould.
Whether you switch to a new bot, and do WG as a personal project, or if you keep it on board for this project, I really want to see how it works.
Really though, I am excited for all of these bots from this project, I love the theme!
Also, even though I hadn't seen Purple-Bot's digi-bash, my Waspinator will be using the Tomahawk mould. I have a few surprises up my sleeve that I can hopefully pull off though. This will be my first custom with major mould changes.
(My Junkion Zombie Bob doesn't count, cause the mould changes were basically just me beating the everloving shit out of a Wreck-Gar >.>)
|
if I could make a suggestion on Tarantulas...sort of an in-joke.....tf: prime arcee.
after all, Black Arachnia was a female character repainted from a male character....
course for a more serious idea, Cybertron Lugnutz or RiD sideways (the G2 mold, not Armada one)
|
|
|
01-11-2012, 11:14 PM
|
#40
|
Location: calgary alberta
|
Re: 2012 TFCon Charity Project
dinobot from kup looks very interesting.the tarantulus from hailstorm intrigues me too!!
dem's some sweet digibashes purplebot!!
__________________
now open for commissions...big and small...minor and heavy,you dream it,i make it.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Donate to Cybertron.ca |
Donations keep this site running, thanks for your support. More details here.
|
|