Is this red alert damaged

[nighthawk21]

Hi there need some help on this one
I am looking to buying a red alert but the person tell me that it mint and this is a mould defect
any advice would help out cause he asking lots lol

[Vorahk]

Hmm tough to say. I don't have any of those figs but him saying its a mould defect. I hope he's not charging you a arm and a leg.

[Abraxys]

if hes asking a lot for a mold defect, tell him to suck it. Go get yourself a Ko mp instead

[MULTIPLEX]

I'm always leery of a 30 year old toy with absolutely no evidence of fading, especially a white, loose toy. It took me forever to find a decent G1 Astrotrain loose with minimal fading and he isn't even white, more like off-white on the legs.

What defect are you referring too?

It's to be in impeccable shape or it's a partsformer made with reissue parts.

Added some pics




Here's the reissue

[justprime]

are you talking about the paint on rear (pic not to good for me ) can you explain the defect a little more?

[justprime]

it could be the reissue of red or a Ko a factory fault does not make it expensive,... a test shot or prototype is a far different story... we see factory faults all the time I just purchased a new generations skids and right out of the package had a factory mold fault on drivers side fender at the mirror, lots of TFs over the years have had faults in production actully most times devalues them.

[Commandoclone87]

Can't be sure becuase the image is not too clear, but judging from the box in the first photo (far-left of the frame), I believe it appears to be most likely a KO or reissue.

[Sun Swipe Prime]

If you're talking about that dimple in the plastic on the left front fender, my old junker Read Alert has that too.

[big dawg]

I think Maz mentioned in one of his recent articles for TFsource that the reissue plastic seems almost translucent under light whereas the originals do not, so I would assume its a reissue (he used bluestreak as his example and the doors were the parts in question).

[elburrito]

If the concern is that the front hood does not appear to line-up with the rest of the car, than I say that,

(a) it is either mistransformed, or
(b) it is a KO