|
|
10-05-2020, 04:54 PM
|
#1
|
Location: Newfoundland and Labrador
|
Quintesson Judge Update - Attaching the Faces Review
This is just a quick tutorial/explanation of how I attach the ER Quintesson Judge's faces. I also explain 2 other methods. It you have struggled or it has taken a long time, it really shouldn't. I hope this helps some folks who have been asking be about how I do it since* the judge's review last week.
https://youtu.be/FJ5d2ByKnZY
|
|
|
10-05-2020, 06:38 PM
|
#2
|
|
Re: Quintesson Judge Update - Attaching the Faces Review
I legit tried the 1st method you described/showed for about 20 minutes with no success. I ended up having to shave off a tiny amount of the back side of the front hook peg and that made it snap in and lock.
Last edited by Malechai; 10-05-2020 at 06:41 PM.
|
|
|
10-05-2020, 06:39 PM
|
#3
|
|
Re: Quintesson Judge Update - Attaching the Faces Review
Quote:
Originally Posted by Malechai
I legit tried the 1st method you described and showed for about 20 minutes with no success. I could get the top hook peg in but the back peg would not snap in. I ended up having to shave off a tiny amount of the back side of the back peg and that made it snap in and lock.
|
One went in easy for me, and I was getting ready to resort to that for the other ... Will see if my pit Quint is any better/worse
|
|
|
10-05-2020, 06:43 PM
|
#4
|
|
Re: Quintesson Judge Update - Attaching the Faces Review
Quote:
Originally Posted by RNSrobot
One went in easy for me, and I was getting ready to resort to that for the other ... Will see if my pit Quint is any better/worse
|
for what its worth, mine is the pit Quint. it came installed but when I lifted the red face to transform, it popped off. I don't think it was locked on properly because of the tolerance issue. The slight shave to get it back on has it on there good now.
|
|
|
10-06-2020, 04:22 PM
|
#5
|
Location: Newfoundland and Labrador
|
Re: Quintesson Judge Update - Attaching the Faces Review
Quote:
Originally Posted by Malechai
I legit tried the 1st method you described/showed for about 20 minutes with no success. I ended up having to shave off a tiny amount of the back side of the front hook peg and that made it snap in and lock.
|
That Rage/ Anger/ Wrath face is a beast,lol.
|
|
|
10-06-2020, 04:24 PM
|
#6
|
Location: Newfoundland and Labrador
|
Re: Quintesson Judge Update - Attaching the Faces Review
Quote:
Originally Posted by Malechai
for what its worth, mine is the pit Quint. it came installed but when I lifted the red face to transform, it popped off. I don't think it was locked on properly because of the tolerance issue. The slight shave to get it back on has it on there good now.
|
I wondered about that. I have yet to have to shave. The first method has been working for me..so far. I own 2 and the pit with be my third so then I'm done but SOOOOO many asked about it I thought I'd try to help those struggling with a few options to try.
|
|
|
10-06-2020, 04:51 PM
|
#7
|
|
Re: Quintesson Judge Update - Attaching the Faces Review
Quote:
Originally Posted by GotBot
I wondered about that. I have yet to have to shave. The first method has been working for me..so far. I own 2 and the pit with be my third so then I'm done but SOOOOO many asked about it I thought I'd try to help those struggling with a few options to try.
|
ty for making the video! its very worth it because it definitely isn't necessarily clear.
|
|
|
10-06-2020, 06:09 PM
|
#8
|
|
Re: Quintesson Judge Update - Attaching the Faces Review
I tried all three methods in your video and the only one that worked for me was sanding down the tab a bit
|
|
|
10-07-2020, 02:46 PM
|
#9
|
Location: Newfoundland and Labrador
|
Re: Quintesson Judge Update - Attaching the Faces Review
Quote:
Originally Posted by Autobotz24
I tried all three methods in your video and the only one that worked for me was sanding down the tab a bit
|
At least one worked. For me, the first method has worked three times so far for me. Luck, maybe?
|
|
|
10-07-2020, 03:09 PM
|
#10
|
|
Re: Quintesson Judge Update - Attaching the Faces Review
Yea, it took me a good 1hr before I could get both faces on, I think what I did wrong is I put the first face on the wrong side, once I switched places they both snapped on nice and tight.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Donate to Cybertron.ca |
Donations keep this site running, thanks for your support. More details here.
|
|
All times are GMT -4. The time now is 07:22 AM.