|
|
08-02-2018, 01:11 PM
|
#31
|
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by chaingunsofdoom
I am not sure I see a problem with his elbows at all... the whole arms look mirrored and ok on mine. I just need to remember how to get his rear tire combined properly.
|
Just make sure the slots line up and the seat is clipped in..
|
|
|
08-02-2018, 02:44 PM
|
#32
|
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by chaingunsofdoom
I am not sure I see a problem with his elbows at all... the whole arms look mirrored and ok on mine. I just need to remember how to get his rear tire combined properly.
|
If you look at the pics you will see the difference between him and Grove. It's not a big deal it just doesn't match up in alt mode
|
|
|
08-02-2018, 03:51 PM
|
#33
|
Location: Fredericton, New Brunswick
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by wervenom
Alright guys and gals. I think we collectively have a problem? I just noticed in one of my pics that the elbows don't match up in alt mode. I've looked at a lot of other photos and it seems it was made that way. Does this make sense to anyone cause it's tripping me out
|
I checked and you are right. The elbows are swapped compared to groove on mine. Doesn't affect anything so I just swapped the arms the elbows go with to match groove.
The image I uploaded should show a better example. For Groove the empty space on the mold is on the outside of the arm while for Wreckgar it is on the inside.
|
|
|
08-03-2018, 12:08 PM
|
#34
|
Location: Newfoundland and Labrador
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by wervenom
Alright guys and gals. I think we collectively have a problem? I just noticed in one of my pics that the elbows don't match up in alt mode. I've looked at a lot of other photos and it seems it was made that way. Does this make sense to anyone cause it's tripping me out
|
I think the "misassembly" is deliberate, just to make him different and seen like a mish mash of junk parts cobbled together. Also, anyone have a clue how to store that axe thing other than on his bloody handle? I have seen it done but no clue how it was accomplished.
|
|
|
08-03-2018, 12:11 PM
|
#35
|
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by GotBot
I think the "misassembly" is deliberate, just to make him different and seen like a mish mash of junk parts cobbled together. Also, anyone have a clue how to store that axe thing other than on his bloody handle? I have seen it done but no clue how it was accomplished.
|
I would disagree only because the packaging both front at back plus the instructions actually show the grey parts being the "right" way but you never know. I did switch them around last night to make them look like the aforementioned packaging, instructions and mold mates
|
|
|
08-03-2018, 07:20 PM
|
#36
|
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by wervenom
I would disagree only because the packaging both front at back plus the instructions actually show the grey parts being the "right" way but you never know. I did switch them around last night to make them look like the aforementioned packaging, instructions and mold mates
|
How did you get them off? I'm trying and having no luck. Don't want to damage them.
Also is his head really small or is it just me?
|
|
|
08-03-2018, 07:32 PM
|
#37
|
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by lifedragon99
How did you get them off? I'm trying and having no luck. Don't want to damage them.
Also is his head really small or is it just me?
|
It's a tough connection but I wriggled them off the mushroom pegs and yeah his head is a bit small. I really want to find a way to mod the head and make him Nancy I think her name is. Just to have the female Junkion
|
|
|
08-03-2018, 09:16 PM
|
#38
|
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by wervenom
It's a tough connection but I wriggled them off the mushroom pegs and yeah his head is a bit small. I really want to find a way to mod the head and make him Nancy I think her name is. Just to have the female Junkion
|
Have you checked out Shapeways.com ? I was just on there and they have a Nancy homage Head meant for Transformers Prime Arcee for like $10. It looks like it may work on this Wreck-Gar deluxe.
__________________
Tonestar
|
|
|
08-03-2018, 09:19 PM
|
#39
|
|
Re: Transformers Power of the Primes Wreck-Gar Released at EB Games
Quote:
Originally Posted by Tonestar
Have you checked out Shapeways.com ? I was just on there and they have a Nancy homage Head meant for Transformers Prime Arcee for like $10. It looks like it may work on this Wreck-Gar deluxe.
|
No I haven't but thanks. I'll check it out
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Donate to Cybertron.ca |
Donations keep this site running, thanks for your support. More details here.
|
|
All times are GMT -4. The time now is 07:48 PM.