Cybertron.CA - Canadian Transformers News and Discussion
Go Back   Cybertron.CA - Canadian Transformers News and Discussion > Transformers Discussion > Transformers Customs and Artwork

Reply
 
Thread Tools
Old 07-22-2014, 01:01 PM   #1
chroma23
douchebag
chroma23's Avatar
Join Date: May 2009
Location: GTA
Posts: 1,141
shapeways - Superion Maximus upgrades

you guys have probably seen this at TFcon already...

the objective of this shapeways project is to take superlink/energon superion maximus to the next level, after the fansproject and dmy add-on kits applied. issues to tackle on include proportions and making use of the leftover energon parts

it first began with me tackling on someone's request over at TFW2005 with just a neck piece, but i guess it kinda grew to upgrades all over. hopefully these parts will put the final nail in the coffin in terms of endless upgrades for superion maximus

below is a list of parts that the kit comes with:

- a neck piece to bring the collar level up to the shoulders

- a new G1-style head, will offer 2 alternate versions for the face: G1 cartoon face mask version, and G1 toy/comic style visor-with-mouth version. the face will be hot swappable

- a leg extension piece that serves the same function as the ones in the DMY kit, but this one also shifts the leg limbs out a little bit. this will greatly reduce (if not eliminate) the problem where the little wings at the knees bump into each other. the piece will also bring the center of gravity of the torso slightly forward

- knee caps attached to the energon star ports on the leg limbs, to bulk up the lower leg limbs

- a new gun extension piece, while small but has a energon star port, 4x 5mm peg holes to attach your leftover energon weapons, and the barrel can also attach the fansproject gun

- a pair of arm cannon adapter to beef up the forearms a bit using some of the energon weapons

these parts are intended to be used in combined mode only.

after the upgrades with have both the fansproject and DMY add-on kits, my superion measures 27.5cm tall, or just shy from 11 inches, when standing straight and upright, measured from the foot to the tip of the antenna on the head. in comparison, fansproject bruticus measures around 26cm, or just a bit over 10 inches (again, measured up to the tip of the antenna). so superion is a bit more than 1/2 inch taller than bruticus after all the upgrades

additional photos (all painted and everything) can be found on my facebook page: http://www.facebook.com/chromahands

more info and an extensive FAQ over at TFW2005: http://www.tfw2005.com/boards/radico...shapeways.html



Here's a youtube video which should explain how things work:
https://www.youtube.com/watch?v=ky4E_6wUye0



ORDER FROM SHAPEWAYS HERE:
FULL kit: Superion Maximus FULL Upgrade Set by chromahands on Shapeways
Head and neck only kit: Superion Maximus Head & Neck Upgrades by chromahands on Shapeways

questions or comments are welcome!
Attached Thumbnails
Click image for larger version

Name:	thumb.jpg
Views:	184
Size:	75.4 KB
ID:	24622   Click image for larger version

Name:	head.jpg
Views:	168
Size:	62.8 KB
ID:	24623   Click image for larger version

Name:	breakdown.jpg
Views:	154
Size:	76.1 KB
ID:	24624   Click image for larger version

Name:	heads.jpg
Views:	143
Size:	62.1 KB
ID:	24625  
__________________
My Shapeways Store - CHROMA HANDS: shapeways.com/shops/chromahands
Follow on Facebook: http://www.facebook.com/chromahands

BST on cybertron.ca: http://www.cybertron.ca/boards/showthread.php?t=47234
FEEDBACK on cybertron.ca: http://www.cybertron.ca/boards/showthread.php?t=16129
chroma23 is offline   Reply With Quote
Old 07-22-2014, 03:20 PM   #2
dingd0ng
Nexus Maximus
dingd0ng's Avatar
Join Date: Oct 2012
Location: Markham, Ontario
Posts: 2,096
Re: shapeways - Superion Maximus upgrades

So you will need to paint it yourself?
__________________
Feedback Thread:
http://www.cybertron.ca/boards/showt...light=dingd0ng
dingd0ng is offline   Reply With Quote
Old 07-22-2014, 03:47 PM   #3
chroma23
douchebag
chroma23's Avatar
Join Date: May 2009
Location: GTA
Posts: 1,141
Re: shapeways - Superion Maximus upgrades

yes, but i use gundam markers, and dead easy to do. check the facebook page for painted and finished images

i should also stress that i cant paint for poop myself

there are painting instructions on the TFW2005 thread
__________________
My Shapeways Store - CHROMA HANDS: shapeways.com/shops/chromahands
Follow on Facebook: http://www.facebook.com/chromahands

BST on cybertron.ca: http://www.cybertron.ca/boards/showthread.php?t=47234
FEEDBACK on cybertron.ca: http://www.cybertron.ca/boards/showthread.php?t=16129

Last edited by chroma23; 07-22-2014 at 03:55 PM.
chroma23 is offline   Reply With Quote
Old 07-22-2014, 09:02 PM   #4
BoNKerS
Animated
Join Date: Jul 2012
Location: York Region
Posts: 1,992
Re: shapeways - Superion Maximus upgrades

Dude congrats on completing the set. Also completing a pretty bada$$ set!!! Looks great!
BoNKerS is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Transformers Shopping







Donate to Cybertron.ca
Donations keep this site running, thanks for your support. More details here.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 02:59 AM.



Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.