|
|
12-18-2022, 12:57 PM
|
#41
|
Location: les Milles Isles
|
Re: Haslab Victory Saber qc issues
Finally took some pics for the Pulse complaint case this morning (it's been a busy week/etc)
Also got around to transforming Saber & the outer VictorySaber "carapace"
Did it blind w no instructions, pretty straightforward but I probably shouldn't be taking the risk *sweatdrop*
Pleased to say I don't appear to be suffering from that jet nosecone two-ports issue
There's lots of little parts where there's extra blue paint flecks on the white plastic surface of the VSaber larger body, from nearby painted blue areas - not too worried about these, figure they can be removed relatively easily
Wondering if the stressmarks from BrainofCourage's red "neck-pin" couldn't be solved by loosening the screw a little bit
The two sides are different, with the red surrounding plastic being thinner near the head of the screw; the other side (the "tip" of the screw?) the red surrounding plastic is thicker, seems to be no issue
But I stressed the thinner plastic around the "head-side" of the screw again this morning just flipping the face portion onto BoC's back - I wouldn't recommend people convert Brain of Courage back & forth too much, or at least make an effort to loosen the screw maybe? Maybe it'll help, I haven't tried it yet
|
|
|
12-21-2022, 01:25 AM
|
#42
|
Location: les Milles Isles
|
Re: Haslab Victory Saber qc issues
Man where do you guys find the serial numbers printed on Star Saber? I found the numbers on Leo, and I found a single number on StarSaber, wondering if he shouldn’t also have two numbers
|
|
|
12-21-2022, 03:05 AM
|
#43
|
|
Re: Haslab Victory Saber qc issues
Quote:
Originally Posted by evenstaves
Man where do you guys find the serial numbers printed on Star Saber? I found the numbers on Leo, and I found a single number on StarSaber, wondering if he shouldn?t also have two numbers
|
I just took the numbers from the box, they are engraved on it
|
|
|
12-21-2022, 10:52 AM
|
#44
|
Location: Sydney, Nova Scotia
|
Re: Haslab Victory Saber qc issues
Quote:
Originally Posted by evenstaves
Man where do you guys find the serial numbers printed on Star Saber? I found the numbers on Leo, and I found a single number on StarSaber, wondering if he shouldn?t also have two numbers
|
Look on Saber?s leg, both numbers are there.
|
|
|
12-21-2022, 10:59 AM
|
#45
|
Location: les Milles Isles
|
Re: Haslab Victory Saber qc issues
Quote:
Originally Posted by MapleMegatron
I just took the numbers from the box, they are engraved on it
|
Quote:
Originally Posted by DanicusTF(cdn)
Look on Saber?s leg, both numbers are there.
|
Thx m8s, I'll check it out tonight
|
|
|
12-28-2022, 11:55 AM
|
#46
|
|
Re: Haslab Victory Saber qc issues
Has anyone had any updates from hasbro in the past week? Haven't heard anything since the 15th
|
|
|
12-28-2022, 12:12 PM
|
#47
|
|
Re: Haslab Victory Saber qc issues
Quote:
Originally Posted by Yonoid
Has anyone had any updates from hasbro in the past week? Haven't heard anything since the 15th
|
Same, I asked for a follow up yesterday.
|
|
|
12-28-2022, 12:19 PM
|
#48
|
Location: Sydney, Nova Scotia
|
Re: Haslab Victory Saber qc issues
Quote:
Originally Posted by Yonoid
Has anyone had any updates from hasbro in the past week? Haven't heard anything since the 15th
|
Same. I don?t expect to hear anything until the new year tbh.
|
|
|
12-28-2022, 12:47 PM
|
#49
|
Location: les Milles Isles
|
Re: Haslab Victory Saber qc issues
Quote:
Originally Posted by Yonoid
Has anyone had any updates from hasbro in the past week? Haven't heard anything since the 15th
|
Finally got my VSaber pics off to Pulse earlier this week, but ya ain’t got nothin but an auto-reply - I’m kind of waiting on the VSaber resolution before I submit another request for replacement parts for my SG Flamewar & HiB AlphaTrion
|
|
|
12-28-2022, 12:52 PM
|
#50
|
|
Re: Haslab Victory Saber qc issues
Quote:
Originally Posted by Yonoid
Has anyone had any updates from hasbro in the past week? Haven't heard anything since the 15th
|
One staff member told me around then to pack it up and a return label was coming, but then a new customer service rep entered the picture and told me to do nothing it was being looked at from scratch. And then no answers to my questions for a week. Very annoying.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Donate to Cybertron.ca |
Donations keep this site running, thanks for your support. More details here.
|
|
All times are GMT -4. The time now is 05:56 PM.