Quote:
Originally Posted by metacooler
Do any other board members have any suggestions?
|
Jetfire can be disassembled. He's tricky and the nose cone is one of the last steps.
matching the colour is beyond my skill. if i were to paint jetfire, i would likely disassemble and do all the red.
if you plan on selling, leave it alone. repaint is worse than rubbed point imo. otherwise, i recommend "Tamiya" acrylic spray and modelling/masking tape.
you could do just the nose without disassembling by putting jetfire in a garbage bag and taping the bag closed with just the nosecone exposed.
tamiya dries fast, but you can also mix it by spraying on a piece of cardboard and using a brush. also self leveling so it looks alright with a paint brush.
