Quote:
Originally Posted by OldOfflineMan
You're really not using it on the joint itself, but on non-moving part that forms part of the joint.
Bondic requires quite a bit of prep to use properly (e.g. sloping and roughening surface) and ultimately failed for me after some play as a lot of shear force is applied to the weld surface.
I'd give epoxy a go, but it's gotta be the right type for the plastic.
|
I have to open mine up after work. I'm still not getting why it's not grabbing the ratchet. I saw pictures on tfw2005 but he glues that piece on not sure why... Is that part the problem?
