Submitted by TheTransTorture
Battle Damage for Dummies ....like me.
DISCLAIMER:
* Before you attempt anything in this tutorial let it be known that this involves techniques that can cause severe burns as well as the use of a "dremel" power tool with cutting disc which can cut through you a lot easier than it can cut through plastic. Proper eye wear protection is essential to avoid flying bits of hot plastic in your eyes.
* Keep children AND pets away when attempting any of these techniques.
* Work in a well ventilated area as some techniques involve melting plastic - you do not want to inhale any smoke or paint/glue fumes.
* Know/learn how to use tools shown here properly before attempting any of these techniques.
* Author of the tutorial and any website it's linked to is not responsible for any damages or injuries as a result of attempting any of these techniques.
Alrighty ! Here we go...
Here is Alt. Silverstreak, he's gonna help me show you how we do things around here...
2 things you'll need : a solid metal rod, I use shower curtain rods.
Bobby pin. (Guys get your gf to pick these up for you - save yourself the shame - LOL)
First were gonna create some laser wounds & small dents and fish out an eyeball...
Laser wounds: I use a (mostly)straightened metal curtain rod, I get the tip super hot almost red hot - I'll let you decide how you heat yours up, use a safe heat source
Once hot apply the rod to the desired location on the figure and PUSH ! - But be careful !
Melting plastic should be displaced around the wound, pull out your rod (... never mind...) soon after, if you leave it in too long the plastic will harden and crack as you remove the rod.
Dents: same thing, just heat up that rod and touch areas where a dent is needed - this work great on a corner like near the top of the head.
Eyeball removal:
I mostly use the bobby pin for this but sometimes if I'm going for a more gory look I'll use the curtain rod. Just get it red hot and PUSH !
Repeat as necessary until eye is removed...
