Re: bps cured bw transmetal megatron
thanks guys!!!
@shepp, I took the easier route.
first I planned to swap the head but the minute I turned the head on the original,the neck promptly snapped.
when I disassembled the original waist,that snapped without a thought.
in the end,i transferred all the original's metallic gold,metallic chrome purple and the rollerskates over to predacon.
for the difference in joint size at the forearms,a light coating of clearcoat nail polish solved that.originally I had a thick coat but ended up sanding it down a bit as it was too tight.
for the stock tail connector chunk,i ended up knocking out the pins on both and swapping the original over.
same goes for the shoulder armor and back fan bits.
i'm probably not going to transfer engine details over as my main intention was to have a stock looking "transformable" tm megs,if anything,just a touch more show accurate.
__________________
now open for commissions...big and small...minor and heavy,you dream it,i make it.
|