Cybertron.CA - Canadian Transformers News and Discussion
Go Back   Cybertron.CA - Canadian Transformers News and Discussion

Cybertron.CA - Canadian Transformers News and Discussion

Cybertron.CA - Canadian Transformers News and Discussion (http://www.cybertron.ca/boards/index.php)
-   Transformers Feedback and Reviews (http://www.cybertron.ca/boards/forumdisplay.php?f=32)
-   -   GCreation Shuraking SRK03 Wrath (http://www.cybertron.ca/boards/showthread.php?t=62478)

Longshot 01-10-2016 07:56 PM

GCreation Shuraking SRK03 Wrath
 
This is my first GCreation product that I had purchased, completely bypassing Thunderous and Growl. Though after the once over I'm actually quite happy with Wrath. Once the Canadian dollar goes back up again I will surely go for the remaining Dinobots to complete the set.

http://i246.photobucket.com/albums/g...psbli58aay.jpg

http://i246.photobucket.com/albums/g...psyyzxyexd.jpg

http://i246.photobucket.com/albums/g...ps1l8av5yo.jpg

Nice enough packaging with some pictures illustrating Wrath. Apart from the bot and his accessories, there are only the instructions and a plastic collector's card showing Wrath's stats.

http://i246.photobucket.com/albums/g...psz5ckdmfg.jpg

http://i246.photobucket.com/albums/g...psoudyj4vw.jpg

http://i246.photobucket.com/albums/g...pszwvo7tqb.jpg

http://i246.photobucket.com/albums/g...ps2m87m1ii.jpg

http://i246.photobucket.com/albums/g...psg32magui.jpg

http://i246.photobucket.com/albums/g...psynzuvfiq.jpg

http://i246.photobucket.com/albums/g...ps6twjmrqv.jpg

According to the Tuna Standard (each can is 1.5 inches tall) both Wrath and Grimlock are a bit past 7 cans tall. There is a minor height difference between Wrath and Grimlock (on the right), approximately 1/8 to 1/4 of an inch.
Materials wise, Grimlock feels better but by no means is Wrath shabby or poor.

http://i246.photobucket.com/albums/g...psqnlrarbp.jpg

http://i246.photobucket.com/albums/g...pshpex4xwr.jpg

http://i246.photobucket.com/albums/g...pspnmstxhd.jpg

http://i246.photobucket.com/albums/g...psr5xniep7.jpg

The chest/crotch piece to Shuraking also doubles as Wrath's shield but the sheer weight of it makes the figure a little too unstable. It can also be mounted on the back of his alt mode and weapons from Thunderous and Growl can also be connected to the backpack.

Longshot 01-10-2016 08:11 PM

Re: GCreation Shuraking SRK03 Wrath
 
http://i246.photobucket.com/albums/g...pssnvvxni3.jpg

http://i246.photobucket.com/albums/g...psefbtfuab.jpg

http://i246.photobucket.com/albums/g...ps3rxivdhc.jpg

http://i246.photobucket.com/albums/g...psmbn7xtvg.jpg

http://i246.photobucket.com/albums/g...psol27mmcp.jpg

The head to Shuraking is tucked away in Wrath's neck cavity. I like that Shuraking has two faces to choose. I much prefer the "monster" look.

http://i246.photobucket.com/albums/g...psbupgsymt.jpg

http://i246.photobucket.com/albums/g...psxvorqckg.jpg

http://i246.photobucket.com/albums/g...psocogh2b8.jpg

http://i246.photobucket.com/albums/g...psifpawd7f.jpg

The alt mode is very similar to Grimlock via the transformation and the final look.

http://i246.photobucket.com/albums/g...psr6yok8id.jpg

http://i246.photobucket.com/albums/g...psbviqxcsj.jpg

Overall, as I stated before I'm quite happy with Wrath and will be picking up the remainder of the team as soon as it is fiscally possible. My only concern is the leg flap that hides the tail component is a little flimsy. During transformation one of the widgets that I needed to turn was a little too tight. And even though I held the flap and moved the piece I was still worried about accidentally ripping the flap off that solo hinge. Other than this minor complaint, I'm looking forward to combining this massive Dinobot.


All times are GMT -4. The time now is 09:17 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Transformers Shopping







Donate to Cybertron.ca
Donations keep this site running, thanks for your support. More details here.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 09:17 AM.



Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.