Cybertron.CA - Canadian Transformers News and Discussion - Heavy Mods & Scratchbuilds Working on a 3D printed sword for TR Wingblade

		Cybertron.CA - Canadian Transformers News and Discussion
Canadian Transformers News and Discussion Forum

Cybertron.CA - Canadian Transformers News and Discussion (http://www.cybertron.ca/boards/index.php)

- Transformers Customs and Artwork (http://www.cybertron.ca/boards/forumdisplay.php?f=17)

- - Heavy Mods & Scratchbuilds Working on a 3D printed sword for TR Wingblade (http://www.cybertron.ca/boards/showthread.php?t=70303)

joshimus

09-28-2017 02:06 PM

Working on a 3D printed sword for TR Wingblade

I am learning to use a Dremel 3D40 printer and I've printed a few things here and there but wanted to try making a sword for TR Wingblade.
Granted it won't be an exact copy but i'm fine with that. The first test turned out alright. I need to adjust the handle width and make a few modifications. I haven't sanded it down either or fully cut off the parts from printing but it does give me an idea of how to fix it and improve on it.

https://i.imgur.com/ynxRs7q.jpg?1

Echotransformer

09-28-2017 06:29 PM

Re: Working on a 3D printed sword for TR Wingblade

Nice work!

Bruticus82

09-28-2017 11:31 PM

Re: Working on a 3D printed sword for TR Wingblade

Cool, looking good!

joshimus

09-29-2017 12:39 AM

Re: Working on a 3D printed sword for TR Wingblade

Making a few modifications to the blade and will try to print again on the weekend. I'll post better pics of it sometime. So far I like the test run.