Autovolt 127 |
01-08-2011 09:23 AM |
Clear Nail Polish isn't helping my loose joints?
Ever since my Classics Mirage's arm got loose i have been trying to get his arm tighter but not too tight, you know that perfect spot, so far it hasn't worked.
For the last week, i have been applying clear nail polish on Mirage's Ball joint and it hasn't gotten any tighter. What am i doing wrong?
Can anyone help?
|
Tekkamanraiden |
01-08-2011 09:48 AM |
Re: Clear Nail Polish isn't helping my loose joints?
Are you letting it fully dry between coats (leaving it overnight)?
|
Bruticus82 |
01-08-2011 10:36 AM |
Re: Clear Nail Polish isn't helping my loose joints?
Is the problem perhaps a "split" or rip on the "socket" somewhere? If it's not intact, building up the "ball" won't really help get it any tighter.
|
jourdo |
01-08-2011 11:34 AM |
Re: Clear Nail Polish isn't helping my loose joints?
My first guess would be not allowing enough dry time, but that is a good suggestion to check for damage to the joint itself.
|
brr-icy |
01-08-2011 01:21 PM |
Re: Clear Nail Polish isn't helping my loose joints?
classics mirage's arm is held around the joint with a screw right? (don't have the figure in front of me) check that the screw isn't stripped or loose, if it's that, then nail polish won't work
|
Autovolt 127 |
01-08-2011 02:30 PM |
Re: Clear Nail Polish isn't helping my loose joints?
Quote:
Originally Posted by brr-icy
(Post 304706)
classics mirage's arm is held around the joint with a screw right? (don't have the figure in front of me) check that the screw isn't stripped or loose, if it's that, then nail polish won't work
|
What do you mean by "stripped" or "Loose"?
If it is can you fix it or will i have to get a replacement Mirage?
|
chans formers |
01-08-2011 03:49 PM |
Re: Clear Nail Polish isn't helping my loose joints?
if there isn't a split in the "cup" joint,maybe try adding some clear to the "inside" of the "cup" joint,as opposed to just the ball end only.
again,patience,let it cure thoroughly:)
|
Matrix_Holder |
01-08-2011 04:14 PM |
Re: Clear Nail Polish isn't helping my loose joints?
Quote:
Originally Posted by Autovolt 127
(Post 304726)
What do you mean by "stripped" or "Loose"?
If it is can you fix it or will i have to get a replacement Mirage?
|
if the hole is stripped that means there is nothing for the screw to hold on to, I don't think that you can fix that....maybe with a bigger screw but that might split the arm so I would not recommend it...you may have to bite the bullet and buy a new one, sorry dude.
|
Autovolt 127 |
01-08-2011 04:28 PM |
Re: Clear Nail Polish isn't helping my loose joints?
Quote:
Originally Posted by chans formers
(Post 304742)
if there isn't a split in the "cup" joint,maybe try adding some clear to the "inside" of the "cup" joint,as opposed to just the ball end only.
again,patience,let it cure thoroughly:)
|
Okay I just applied some on, I hope this solves it completley.
Quote:
Originally Posted by Matrix_Holder
(Post 304750)
if the hole is stripped that means there is nothing for the screw to hold on to, I don't think that you can fix that....maybe with a bigger screw but that might split the arm so I would not recommend it...you may have to bite the bullet and buy a new one, sorry dude.
|
It's not stripped well atleast according to my mom, so i think i'l be good for now.
|
Bruticus82 |
01-08-2011 04:41 PM |
Re: Clear Nail Polish isn't helping my loose joints?
Pictures might help us all diagnose the issue. :-)
Remember to use "macro mode" on your camera (the picture on the button/setting should look like a flower).
|
All times are GMT -4. The time now is 12:31 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
|
Donate to Cybertron.ca |
Donations keep this site running, thanks for your support. More details here.
|
|
All times are GMT -4. The time now is 12:31 PM.