http://i580.photobucket.com/albums/s...ng/combine.jpg
this is actually funny because i was designing these parts at the same time as echotransformer did lol, but we have slightly different approaches....
anyways here it is, a kit of parts which addresses some issues to your crazy-devy-enhanced G1 predaking:
01 ratchet notch pieces for CDMW-36 hip parts
02 leg stopper for CDMW-15 leg parts
03 neck piece for CDMW-10 head part
IF YOU DO NOT HAVE ANY OF THE ABOVE CDMW PARTS, THIS KIT IS NOT FOR YOU
you can order from shapeways here:
https://www.shapeways.com/model/1234...ation-kit.html
tested and recommended material is WSF polished, but you are welcome to try out in BSF if you dont feel like painting the parts in black
WISHLIST
sorry, no wishlists or requests for G1 predaking at the moment, as i will like to concentrate my efforts on my xovergen powermaster prime parts for now:(
but do let me know if any of my parts are not working etc
01 ratchet notch pieces for CDMW-36 hip parts
http://i580.photobucket.com/albums/s...ng/notch01.jpg
- fixes fatal problem where the new hip joints will not support itself due to predaking's torso and arms weight, thus the entire figure tipping over and falling apart
- dis-assembly and re-assembly required on the crotch piece. just remove the screws and insert the notch parts as shown in this photo:
http://i580.photobucket.com/albums/s...ng/notch02.jpg
- then put in the legs and re-assemble again, taking note that the hole or "belly button" above the crotch faces forward so that you can insert the crotch plate later on. please note that some force is necessary when re-screwing the crotch piece. this will ensure that the ratchets stay locked; better safe than sorry and do not worry as it will not damage any parts in any way. the notches will be slightly bent inside, but it will not break and will withstand the weight of predaking's body
- my predaking has been standing strong for weeks, and yes it makes clicking ratchet sounds when rotating the legs:D
- no grease required on the ratchet joints
02 leg stopper for CDMW-15 leg parts
http://i580.photobucket.com/albums/s...daking/leg.jpg
- prevents tantrum from sliding down (and the whole figure falling apart) due to the body's weight when using the extended foot parts
- just insert from the back as shown
03 neck piece for CDMW-10 head part
http://i580.photobucket.com/albums/s...ing/neck01.jpg
http://i580.photobucket.com/albums/s...ing/neck02.jpg
- purely aesthetic piece, gives predaking a neck so his head will not sink into the body as of he has no neck, especially with the lion mane inserts:D
its not much but thats pretty much it for this simple kit of parts, but a must-have if you want your crazy-devy-enhanced predaking to stand and not tip over. questions and comments are welcome
