Cybertron.CA - Canadian Transformers News and Discussion
Go Back   Cybertron.CA - Canadian Transformers News and Discussion

Cybertron.CA - Canadian Transformers News and Discussion

Cybertron.CA - Canadian Transformers News and Discussion (http://www.cybertron.ca/boards/index.php)
-   Transformers General Discussion (http://www.cybertron.ca/boards/forumdisplay.php?f=2)
-   -   Need a little help with my MP-36+ (http://www.cybertron.ca/boards/showthread.php?t=75152)

Darkmatter 01-10-2019 11:39 PM

Need a little help with my MP-36+
 
Hi, my MP-36+ arrived and I moved the grey back barrel down and now I don't know how to get it back vertical. I even looked at a youtube video and that guy had the same issue.

Thanks!

Edit: Going to try to add this here to avoid having to make another thread. I'm sad that the 36+ didn't come with all the accessories that 36 did. Is there a way to buy them, or is there a 3rd party company that sells equivalent looking ones?

Thanks!

Darkmatter 01-11-2019 03:20 PM

Re: Need a little help with my MP-36+
 
Adding some photos. I can't get the barrel to swivel up past this point without it hitting a part. Not sure what to do and refuse to try to force it since I'm not sure what to do next.

Thanks.

https://ibb.co/hLVXgNXhttps://ibb.co/hLVXgNX


https://ibb.co/1szyK5Bhttps://ibb.co/1szyK5B


https://ibb.co/s3V8rr7
https://ibb.co/s3V8rr7

Echotransformer 01-12-2019 09:12 PM

Re: Need a little help with my MP-36+
 
Hard to see from the pictures...but can it be partially disassembled somehow? Maybe remove one or two screws? This is what I've been doing lately if something is jammed...sometimes I don't even remove the screws just loosen then re-tighten. Sorry I can't be of more help but hopefully that's a idea for you.

Darkmatter 01-12-2019 09:46 PM

Re: Need a little help with my MP-36+
 
Actually I took better pictures with my real camera.

https://ibb.co/Rh5wbt4

https://ibb.co/BZRqk4X

https://ibb.co/tQFH9hy

These any help? :)

Thanks.

DM

The7thParallel 01-12-2019 10:49 PM

Re: Need a little help with my MP-36+
 
It’s on a double hinge. Lower it at the grey point right by the back and then adjust the barrel side to swing up. There are two points on that grey connector that move.

MapleMegatron 01-13-2019 03:53 PM

Re: Need a little help with my MP-36+
 
I cant help with the actual issue but I can answer the other question. The only way to get the missing accessories for cheap is to buy the KO version of MP 36. Its the same it would cost if another 3p company released just that extra stuff I guess.

https://www.ebay.ca/itm/Transformers...aGtp:rk:1:pf:0

And you asked me questions about the coin. I dont ever deal with canadian companies for MPs, so I dont know if they send coins or not for particular releases. All I konw is that any coin you find on e-bay is the real thing since there are no coin KOs.

Hope that helps.

Darkmatter 01-13-2019 04:42 PM

Re: Need a little help with my MP-36+
 
Thanks it does. Do you know if the KO accessories are decent?

MapleMegatron 01-13-2019 10:05 PM

Re: Need a little help with my MP-36+
 
I dont know anything about it since i only bought the authentic set


All times are GMT -4. The time now is 06:44 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Transformers Shopping







Donate to Cybertron.ca
Donations keep this site running, thanks for your support. More details here.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 06:44 AM.



Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.