Disassemble PotP Slug
 

Are there any online resources that detail how to take Slug apart down to it's base pieces?


I tried taking apart the body and after removing two screws in the body, I was still unable to pry it open.

Re: Disassemble PotP Slug
 

You could try looking on in the customs section on this site or on tfw2005 and maybe ask someone there who's done a mod on that figure. You might even try searching youtube and see if someone has done a modding video on that figure.

If you've removed all the screws and it's still not coming apart, and you're sure there isn't some sort of tricky peg, then chances are that it's glued.