Cybertron.CA - Canadian Transformers News and Discussion
Go Back   Cybertron.CA - Canadian Transformers News and Discussion

Cybertron.CA - Canadian Transformers News and Discussion

Cybertron.CA - Canadian Transformers News and Discussion (http://www.cybertron.ca/boards/index.php)
-   Transformers General Discussion (http://www.cybertron.ca/boards/forumdisplay.php?f=2)
-   -   Help with CW Computron! (http://www.cybertron.ca/boards/showthread.php?t=72068)

FreakNasty 03-30-2018 02:23 PM

Help with CW Computron!
 
#1 I find Brawls leg mode splits at the bottom easily

#2 When moving his arms around, his chest plate splits apart easily and I have to put his inner workings tight together again. (It seems only the chest plate is holding everything together)

WereDragon EX 03-30-2018 02:38 PM

Re: Help with CW Computron!
 
#1 Try coating the tabs that hold the leg mode together with Future floor polish and then press the tabs into their ports and leave the polish to dry for a day or so. It thickens the tabs and might allow them to "grip" in the ports better and prevent the leg mode from splitting apart.

#2 The chest plate is holding everything together. Try doing the same fix with it as suggested in #1.

FreakNasty 03-30-2018 03:35 PM

Re: Help with CW Computron!
 
Quote:

Originally Posted by WereDragon EX (Post 756427)
#1 Try coating the tabs that hold the leg mode together with Future floor polish and then press the tabs into their ports and leave the polish to dry for a day or so. It thickens the tabs and might allow them to "grip" in the ports better and prevent the leg mode from splitting apart.

#2 The chest plate is holding everything together. Try doing the same fix with it as suggested in #1.

Thank you, I'll give that a try!

WereDragon EX 03-30-2018 03:57 PM

Re: Help with CW Computron!
 
Quote:

Originally Posted by FreakNasty (Post 756432)
Thank you, I'll give that a try!

No problem, hope it helps.

GotBot 03-30-2018 04:03 PM

Re: Help with CW Computron!
 
The chest is what it is and the polish might work. For the legs, I actually took the feet apart and sanded the ratchets. They still ratchet, just softly, and I can pivot the ankles and both legs stay together.

Zenith27 03-30-2018 07:02 PM

Re: Help with CW Computron!
 
Quote:

Originally Posted by WereDragon EX (Post 756427)
#1 Try coating the tabs that hold the leg mode together with Future floor polish and then press the tabs into their ports and leave the polish to dry for a day or so. It thickens the tabs and might allow them to "grip" in the ports better and prevent the leg mode from splitting apart.

#2 The chest plate is holding everything together. Try doing the same fix with it as suggested in #1.

Finger nail top coat works as well. Found on the rack with all the nail polish. Comes with a little brush too!


All times are GMT -4. The time now is 10:44 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Transformers Shopping







Donate to Cybertron.ca
Donations keep this site running, thanks for your support. More details here.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 10:44 PM.



Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.