| Sun Swipe Prime |
11-14-2011 09:49 PM |
Re: G1 Scorponok from Headrobots Butcher
Quote:
Originally Posted by bedtime
(Post 385909)
how did you go about doing the sticker sheet? do you contact reprolables and just tell them the colors you want switched or what?
|
First, I scanned the stronghold sticker sheet, photoshopped the image colors and text, adjusted the image to the right scale, then printed the jpg out at Kinkos. You can fit like six of them on one A4 sized sheet.
To make the actually sticky part, there's a youtube video on how to make stickers, but here's the basic process in a nutshell. I took some multi purpose 2x4 Avery labels I got a Staples, put some double sided tape over a couple of them, roughly cut out the sticker image parts from the printed sheet and stuck them on to the double sided tape. I then took some clear packing tape and covered that all up. Last step is to cut the stickers out. There'll be a clear line from the scan. Now you just have to peel and stick. Results may very depending on the printer. |
